RESIDENTIAL

Residential Services

Home Wiring

General Lighting

General Electric

LED Lighting

Wiring & Rewiring

Maintenance

Repair

Surge Protection

TV Mounting

Panel Upgrades

Troubleshooting

Other Installations

Entertainment

Ethernet on New Builds

Ceiling Fans

Troubleshooting

HOME ALARMS

THERMOSTATS

SECURITY CAMERAS

SURROUND-SOUND SPEAKERS

SURGE PROTECTORS

SMART WIRING

ELECTRICAL REPAIR & MAINTENANCE

TV MOUNTING

PANEL UPGRADES

WIRING & REWIRING

LED LIGHTING

NEW BUILD ETHERNET INSTALLATION

CEILING FAN SERVICES

~WE RECOMMEND FANS BEST SUITED TO MEET YOUR NEEDS~

HUGGER

This type of mounting is recommended if the ceiling is 8 feet or less. Hugger ceiling fans are commonly seen in apartments and condos because they allow for minimal space between the housing and the ceiling.

CLOSE-TO-CEILING

If the distance between the floor and ceiling is approximately nine feet, you may want to consider this option. Here a short downrod a few inches long is used between the ceiling and the fan. A pro of this option is that the space created will allow for efficiency, but is still close to the ceiling.

DOWNRODS

With high ceilings, long downrods are your best option. By using long downrods, the fan is extended allowing for proper air circulation.

SLOPED

Sloped ceiling adapter should be when the ceiling is inclined. It is important to check if the fan is compatible with angled ceiling before purchasing a fan.

OUTDOOR FAN OPTIONS

WET RATED

These types of fans are resistant to all types of weather. They can come in contact with water and the finishes will not get damaged. They also protect against any type of corrosion.

DAMP RATED

These types of fans are suitable for covered outside areas because they can sustain natural humidity. However, these fans aren’t meant to have direct contact with water. These types of fans protect against rust.

BLADE OPTIONS

When being presented with the option of four or five blades, many wonder if there is even a difference in efficiency. Well, there is. The more blades a fan has, the heavier the blades are which will slow down the fan and decrease air circulation.

PLASTIC

This is a commonly used option due to how inexpensive it is. In addition, they can be easily shaped into unique forms. They also can be used outside.

MEDIUM DENSITY FIBERBOARD

This option is made from a variety of woods that are compressed together. After being compressed, the material is laminated. This is not a good option for outdoor settings.

METAL

This is a good option if the ceiling is high and space is large. This is also a great option for outdoors.

WOOD

This option should be used indoors or outdoor damp locations.

FANSYNC

fanSync is an app that users download on their smartphones and can monitor the speed and lighting of their fan from their fingertips.

HANDHELD/WALL COMBO

A wall control is easily installed on your wall. A handheld remote allows for users to change fan settings anywhere within the romotes range. There are also hybrid options of handheld and wall, which combines the two into one.

PULL CHAIN

This option is the traditional way to operate fans.

ENERGY SAVING OPTIONS

Purchase a ceiling fan with an “Energy Star” label. This is a label given by the EPA when the product has gone through rigorous testing to establish high efficiency. In addition, these products save you money on your power bill. These products also come with a warranty.

SHOP CEILING FANS

Shop ceiling fans at Home Depot

ATTIC FANS

Common Residential Electrical Problems

It’s inevitable that you’ll experience some electrical problems once in a while at home. It’s important to know the causes behind them so you can call an electrician to fix them so you know you’re safe.

Are you experiencing these electrical problems at home? It might be time to have them checked by a professional.

1.  Electrical Surges or Dips

Surges are a spike in charge in power lines which causes a current increase in your outlets. Frequent surges can cause damage to your electronics and cut their lifespan drastically. 


Dips are sporadic drops in voltage that cause your lights to dim and flicker. They’re also known as brownouts. They’re usually attributed to connected devices that are faulty or made poorly, using up a lot of power when turned on.


Most of the time surges and dips can’t be helped because they’re either caused by lightning strikes, damaged power lines, or a mistake by your power company. To prevent your appliances from getting damaged, use a surge protector. If you still experience surges, it’s time to call an electrician.

2. Flickering Lights

Aside from brownouts, flickering lights can also be caused by a poor connection that could eventually lead to sparking, overheating, and even a fire.


If it happens often, turn off the malfunctioning bulbs and have an electrician check the connection. It could be that loose or corroded wires are making contact, known as arcing.

3. Frequent Light Bulb Blowouts

If your light bulbs burn out often, it could also be because of a poor connection that can lead to overheating. 

4. Warm Outlets or Switches

This means an outlet is overloaded, which means its wiring can’t carry the electrical load of the gadgets plugged into it. This can cause a fire. 


Unplug the devices from that outlet and spread them around other outlets in your house. Make use of smart extension cords.

5. Tripping Circuit Breakers (also referred to as Nuisance Tripping)

This is most commonly caused by circuit breakers overloading. As we accumulate more electronics and appliances or upgrade our entertainment systems, there are no longer enough power points in our home to accommodate them. 


Make sure you unplug devices when they’re not in use and to spread them around so you don’t overload a single circuit.

A frequently tripping circuit breaker could be an indication of bigger problems though. So if you feel you aren’t using that much electricity in your home to warrant an overload, it’s time to call in a licensed electrician to do a check up.

6. Damaged Extension Cords

If you have pets that like to chew on things, you better check if your extension cords are one of them. Make sure to cover them with protective material or hide the cords where cats and dogs can’t reach them.

7. Dead Outlets

Another sign of a potentially deeper problem is the wiring of your home. If you have one or several outlets that aren’t working, call your trusted electrician. Loose or damaged wires within the walls are dangerous and can cause a fire. 

8. Some Lights Are too Dim or Too Bright

Do you notice some lights in your house are brighter or dimmer than others? This could be because of a bad main neutral connection and needs the attention of an electrician.

9. Electrical Shocks

If you experience shocks when you touch a device or switch, there could be a problem with the wiring. Don’t attempt to find out the problem yourself, have an electrician come over to check right away. 


Alert members of your household to the faulty device or switch and put up a sign reminding them not to touch it.

10. High Electric Bill

Damaged wires and circuits can contribute to a high electricity bill. If your monthly bill confuses you as to how you’re using that much electricity, it could be a problem on those two things. Make sure you’re also unplugging unused devices and chargers. 

Call B&W Electric immediately if you have any of these problems occurring in your home for any extended length of time. Never attempt to fix any wiring yourself. As licensed electricians, we can help make your home, office, or business, a safer place.

PROTECT YOUR PET FROM ELECTRICAL HAZARDS